Ventilator AHP300

Invasive and non-invasive support for infant (5 kg and up) to adult patients, with a flexible array of ventilation options including Pressure Control/Volume Control ventilation , SIMV/Assist Control spontaneous breath support, and stand-alone CPAP/BiLevel support.

•  Enhanced Ease of Use:

 The AHP300 offers value-added features for intra-hospital and inter-hospital transport.

Quick Start Ventilation: featuring programmable presets, the AHP300 allows trained caregivers to rapidly recall up to 5 saved ventilation protocols.

Long Battery Life: up to 7.5 hours on internal battery, with auxiliary battery capability for up to 21 hours of battery life. 

Oxygen Conserve Mode: allows the use of low pressure sources (oxygen concentrator, liquid oxygen, etc.) to extend available oxygen. 

•  Multi-Environment Capability:

 For everyday transport or evacuation from extreme environments, the AHP300 has you covered. It features rugged shock and vibration resistance, and IPX22 water resistance. 

• Low Cost of Ownership:

 Simple preventive maintenance schedule along with low-cost battery and repair parts result in significant savings and lower cost of ownership than comparative broad-featured ventilators.

• Specifications:

•         Patient Range:

 Infant/Pediatric (5 kg) to Adult

• Controls/Settings:

Modes

• (Pressure or Volume) A/CMV
• (Pressure or Volume) SIMV
• CPAP
• Bi-Level Support (PS+CPAP) (can be programmed in custom mode)
• NIV (non-invasive ventilation) available in all modes
• 5 Programmable Quick Start Presets  

Tidal Volume:  40 to 2,000 ml

RR (Respiratory Rate): 0 or 5 to 60 b/min

I Time (Inspiratory Time): 0.5 to 2.0 sec

PEEP/CPAP: 0 to 25 cmH2O/0 to 25 mbar

PS (Pressure Support)**:  0 to 25 cmH2O / 0 to 25 mbar*

*PEEP + PS cannot exceed 25 cmH2O/mbar Operating Humidity 5 to 95% non-condensing

Flow: 5 to 60 L/min (flows > 80 LPM in PS Mode, CPAP and demand flows)

Pressure Control (Target Pressure): 15 to 55 cmH2O / 15 to 55 mbar

Ptrig (Sensitivity): -5 to -1 cmH2O / -5 to -1 mbar

Manual Inflation: 2 second maximum

FiO2: .21 to 1.00

Maximum I Time: 2 seconds

Flow Wave Pattern: Square or descending**

** Based on mode selected

Auto Lock Function: ON / OFF

Remote Alarm Option: Normally Open/Closed

• Monitored Parameters:

Paw (Peak, Base)
Delivered Tidal Volume
Spontaneous Breath Count
Integrated Battery Level
External Battery Level - When Attached

• Calculated Parameters:

I: E Ratio
Flow rate
FiO2

•  Alarms:

High Airway Pressure: 10 to 55 cmH2O/10 to 55 mbar

Low Airway Pressure: 5 to 15 cmH2O/5 to 15 mbar

Back-up Ventilation Alert: 20 second fixed, apnea ventilation mode

Low Source O2: Triggers at 40-37 psi

Low Source Air: Triggers at 40-37 psi

Device Alert: Malfunction alert

Critical Battery: Approx. 20 minutes of battery charge remains

Silence/Reset: 110 sec

• Pneumatics:

Gas Delivery System: Internal dual diaphragm

Air/Oxygen Mixer: Integrated

Oxygen Input: 41 to 87 psig oxygen

•  Power Requirements:

AC Voltage: 110- 240 VAC, 50/60 Hz, max. 1A

DC Voltage: 11-15 VDC, max. 5A.

• Integrated Battery Parameters:

Battery Composition: Sealed Lead Acid

Run time; 100% O2: 7.5 hours

Run time; 60% O2: 7.5 hours

Run time; 100% air (on compressor): 7 hours

•  W/ External Battery Pack Parameters (MCV-AUXBAT):

Battery Composition: Sealed Lead Acid

Run time; 100% O2: 21 hours

Run time; 60% O2: 21 hours

Run time; 100% air (on compressor): 21 hours

•  Dimensions & Weight:

Width: 13.3" (34 cm)

Depth: 5.3" (13 cm)

Height: 13.8" (35 cm)

Weight: 18.8 lbs. (8.5 kg)

Environmental

Shock: 100 G-Force

Vibration: To IEC 60068-2-6

Operating Temperature: 0° F to 122° F (-18° C to 50° C)

Storage Temperature: -40° F to 140° F (-40° C to 60° C)

Operating Humidity: 5 to 95% non-condensing

Water Ingress: IPx 22

• Signal Connections:

Remote Alarm: 1/4" phone jack to connect to nurse call or remote system.

• Specialty Features:

Quick Start:  Programmable presets to quickly recall pre-determined ventilation protocols

Custom Modes:  3 additional programmable custom modes that are available for quick recall

Oxygen Conserve:  Allows the use of up to 10 LPM of oxygen at 3 to 40 psi through the DISS port or up to 10 LPM of oxygen at less than 10 psi through the low pressure barb fitting for use with oxygen concentrator